READY TO BE PUT TO WORK AGAIN, TOTALY TESTED IN GOOD WORKING CONDITION! I DO HAVE THE LOGO BADGES THAT GO ON THE SPEAKERS. THAY CAN BE CLEANED UP AND RE-ATTACHED ON THE GRILLS THAT ARE INCLUDED ALSO. For an extra price I. Rackmount, wire and add cables for.
JUST LET ME KNOW AND IT COULD BE READY FOR YOUR NEXT EVENT! I COULD ADD FOR AN EXTRA PRICE. 1-ROAD RACK CASE FOR AMP AND CABLES. ALL SPEAKER AND AUDIO CABLES. RACK MOUND DRAW FOR SPEAKER CABLES.
I have DBX Processor's, Meyer Sound. Ashley GQX 3102, Rack drawer's to put all speaker wires in and more.Could rack the amp with other equipment. LET ME KNOW IF I CAN MAKE THIS JUST A PLUG AND PLAY SYSTEM!
NEXO is one of the world's leading sound reinforcement loudspeaker manufacturers. Founded in 1979, the company is dedicated to crafting practical solutions with solid engineering.
Each new design begins with a proprietary sophisticated computer simulation process that allows every parameter to be extensively modelled and simulated, leading to breakthrough cost and performance gains. Nexo's comprehensive product line includes loudspeakers, analogue and digital control electronics and amplification; all designed to deliver consistent sound quality and long- term reliability for a broad range of applications. Continuing research drives all new product development to deliver on our promise.
2-NEXO PS10 P remium Studio Grade Monitor's. The NEXO PS10 Loudspeaker can be safely driven with over 500 Watts of amplifier power, yet it is only half the weight and volume of standard trapezoidal systems. The dispersion, architecture and weight balance of the PS10 Loudspeaker are designed to provide both exceptional PA and stage monitor performance from a single product without compromise. This flexibility is realized by a proprietary constant directivity asymmetrical dispersion horn, easily rotated in four positions by the user.Coupled with the horns unique progressive horizontal (50° to 100°) and vertical (55°) dispersion, the most suitable pattern can be selected for vertical or horizontal PA usage or wedge monitoring. The PS10 Loudspeaker System is the foundation of Nexos acclaimed PS Series; versatile, compact, full-range loudspeakers tailored for a wide range of touring and installed sound reinforcement applications. Like all Nexo products, the PS10 Loudspeaker and optional LS500 Subwoofer are designed to work with advanced electronic processors, guaranteeing consistent performance and reliability of the highest standard. 1 x 10 (25 cm) 8 Ohm driver. 1 x 1 throat driver + Low Distortion, Constant Directivity Asymmetrical Dispersion Horn. Dimensions Height x Width x Depth. 515 x 316 x 277 mm (20.25" x 12.5" x 10.88). 2 x NL4MP SPEAKON 4 pole. Baltic Birch Ply finished with textured, polyurethane black coating.
Acoustic foam on perforated steel grille (77% transparent). Flying Points & Fixed Installation.
1 steel anchor point for flying track on top (6 positions). 2 steel anchor plates for flying track on bottom (1 position). Built in Stand Fitting, 35mm (1 3/8). 65 Hz - 20 kHz ±3dB (40 Hz - 20 kHz ±3dB with LS500 Subwoofer). 58 Hz - 21 kHz (38 Hz - 21 kHz with LS500 Subwoofer).
98 dB SPL Nominal - 96 dB SPL Wideband. 124 to 127dB Peak for 200 to 500 W RMS Amp. Directivity : Q & DI [c]. Q : 16 Nominal DI : 12 dB Nominal (f 3 kHz).
200 to 500 Watts into 8 Ohms for 1 x PS10; 400 to 1000 Watts into 4 Ohms for 2 x PS10 per channel. The PS10 Loudspeaker must be used with a Nexo Controller (PS10 TD analogue, NX241 digital or PS10AMP integrated power amplifier). Use without a properly connected Controller will result in poor sound quality and may damage the components. After removing the quick-release front grille, the HF Horn can be rotated to one of 4 positions for dispersion configuration. The PS10 Loudspeaker can be used with or without the optional LS500 Subwoofer.
Active two-way operation with the LS500 is included in the PS10TD, NX241 or PS10AMP. One LS500 matches 2 x PS10, additional LS500 may be used for enhanced effect. The PS10 is wired 2- & 2+ on Speakon connectors, LS500 on 1- & 1+.Loop through Speakons are present on both products. Single identical cables can thus be used to loop through combinations of up to 2 x PS10 & 1 x LS500 in no particular order. The LS500 Subwoofer extends the usable range of the PS10 Loudspeaker to 38 Hz, providing high performance and high power output (134 dB Peak) in an extremely compact, light weight package. The PS10 TDControllers integral sub section and combined signal (PS10 and LS500) Speakon wiring ensure cost effective and simple system implementation. One LS500 is typically used with 2 PS10 loudspeakers, additional units may be used for an enhanced effect. VLF extension (to 38Hz) of PS10 Loudspeakers. Sophisticated control electronics ensure reliable, linear operation. Integral pole mount that supports 1 or 2 PS10 Loudspeakers. VLF 1 x 15 (38cm) long excursion 4 Ohm driver. Height x Width x Depth 430 x 689 x 528 mm (16.88" x 27.13" x 20.75). Weight 33 kg (73 lbs) net.
Connectors 2 x NL4MP SPEAKON 4 pole. Construction Baltic Birch Ply & textured, polyurethane black coating. Fittings: Handles 2, integral to cabinet.Front finish Perforated steel grilles. Flying Points 3 steel anchor points for flying tracks on side and back.
Stand fittings Internal Stand Fitting on Top (35mm, 1 3/8) accepts a mast supporting 1 or 2 PS10s. SYSTEM SPECIFICATIONS LS500 with PS10 TD Controller. Frequency Response [a] 43 Hz - 110 Hz ±3dB. Recommended Amplifiers 300 to 800 Watts into 4 Ohms.The LS500 Subwoofer must be used with a Nexo Controller (PS10 TD analogue, NX241 digital or PS10AMP integrated power amplifier). The LS500 Subwoofer provides optional VLF extension for PS10 Loudspeakers. Active two-way operation with the PS10 is included in the PS10TD, NX241 or PS10AMP. The PS10 is wired 2- & 2+ on Speakon connectors. LS500 on 1- & 1+.
As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice. 500 = 28 kg (62 lbs) 0.238 cu m (8.41 cu ft).A Response curves & data : Anechoic Far Field for the PS10 + PS10TD. Half-Space Anechoic radiation for the LS500 + PS10TD. Sensitivity & Peak SPL data. These will depend on spectral distribution and crest factor of program material. Measured with band limited Pink Noise. Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3dB range. Data are for speaker + processor + recommended amplifier combinations. Peak SPL is at clipping of recommended amplifier. Match Each PS10 & LS500 Cabinets. The PS10AMP is a dedicated amplifier that allows the PS10 Loudspeaker and optional LS500 Subwoofer to achieve exceptional performance from such compact packages.
The integrated PS10 TDController provides crossover, sensed amplifier control and system equalization optimized for the PS10 and LS500. Like all Nexo processors, the PS10AMP provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalizers (VCEQs), reducing levels only at frequencies when and where necessary. The PS10AMP has two inputs, L and R, and three outputs, L, R and summed LSub out. The PS10AMP Configuration switch automatically configures the unit for 2 channel mode (LSub Off), where the PS10AMP drives 2 to 4 PS10 Loudspeakers in stereo (2x 850 Watts/4 Ohms) or 3 channel mode (Lsub On), where the PS10 AMP drives 2 PS10 Loudspeakers in stereo (2 x 430 Watts/ 8 Ohms) and 1 LS500 Subwoofer (850W/ 4 Ohms) with a summed mono signal of the L+R input signals.
Since the Configuration switch also rewires the output connectors and displays PS10AMP mode status with LED indicators, the PS10AMP minimizes installation cost and complexity while ensuring faultless performance. The PS10 Loudspeaker System is the foundation of Nexo's acclaimed PS Series; versatile, compact, full-range loudspeakers tailored for a wide range of touring and installed sound reinforcement applications. Touring, installed PA for clubs, A/V, theater, broadcast, etc. High quality stage monitoring for clubs, A/V, theater, broadcast, etc.
Fill-in system in conjunction with larger Nexo PS/Alpha systems. PS10's compact size, enormous sound and reconfigurable horn make it the perfect solution for almost any application.
Precision circuits engineered for the PS10/LS500 systems permit increased sound pressure and operational reliability. Servo controlled VCEQs provide precise dynamic control without spectral imbalance.
Automatically configured 2 or 3 channel modes allow the amplifier's 1700W power capability to be optimized for a variety of system configurations. Integrated TDController simplifies wiring and provides a precise match to the amplifier. Comprehensive indicators and controls, inputs and output connectors are all located on the front panel.Super silent, back to front variable speed fan. Input Impedance 36 kOhm (balanced).
LSub On, 3 channels: 2 x 430W/8 Ohms, 1 x 850W/4 Ohms (1 x PS10 per channel and 1 x LS500). Power Supply` 115/230 VAC +/-10% 50/60 Hz. Audio inputs Two L&R Audio inputs. Two XLR-3F connectors and two parallel XLR-3M.Audio outputs Two NL4MP SPEAKON 4-pole connectors. Controls Stereo L/R Link, Level, LSub Level, Lsub On, Power On.
LED Indicators Amp Signal, Amp Peak, Speaker Protect VLF, Speaker Protect LF, Speaker protect HF. I went to my storage and worked out how everything should be packed and the total weight. Comes to a pallet with packing. Please checkout my other listings for more Professional. Audio, Video & Stage Lighting Equipment From Around Central Florida.The item "NEXO 2-PS10, 1-LS500, 1-PS10Amp POWERED SPEAKER SYSTEM + 1-Road Case For PS10's" is in sale since Tuesday, April 6, 2021. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Speakers". The seller is "member5850048" and is located in Davenport, Florida. This item can't be shipped, the buyer must pick up the item.