Used Road Case

Yamaha M7CL-48 console withspare psu & roadcase

Yamaha M7CL-48 console withspare psu & roadcase
Yamaha M7CL-48 console withspare psu & roadcase
Yamaha M7CL-48 console withspare psu & roadcase

Yamaha M7CL-48 console withspare psu & roadcase    Yamaha M7CL-48 console withspare psu & roadcase

This console is from our rental inventory, and in excellent working condition. The M7CL series is a digital live-sound console that carries on the digital evolution from the acclaimed PM1DV2 and PM5D consoles.

It includes an impressive array of advanced concepts such as the "Centralogic" control interface that makes it as easy and intuitive to use as an analog console, and in-depth access management facilities that will be particularly appreciated in installations. The M7CL is familiar and comfortable to use, offering a level of convenience that overturns the preconception that "digital is difficult". A surprising range of functions that you would normally have to supply in the form of peripheral equipment is built in, and all of this is provided in a space that is dramatically less than an analog console of similar scope.

The M7CL is the ideal digital mixing console for medium size live sound applications that have previously been handled by analog gear. 48 mono microphone/line inputs, 4 stereo inputs, and 3 Mini-YGDAI card slots (a total of 56 mixing channels).

16 mix buses, LCR bus, 8 matrix channels, and 8 DCAs assignable to 16 omni outputs. Virtual effect and EQ rack: up to 4 simultaneous multi-effect processors; up to 8 simultaneous 31-band graphic EQs. Centralogic interface: central, logical, and intuitive. Internal: 44.1 kHz, 48 kHz.

External: 44.1 kHz (-10%) to 48 kHz (+6%). Signal Delay: Less than 2.5ms INPUT to STEREO A, B (at sampling frequency = 48 kHz).

Fader: 100mm motorized x 62 (46). Touch Screen LCD: 800 x 600 dot TFT LCD. Dynamic Range (Input Gain=Minimum, PAD=ON, Master fader at nominal level and one input fader at nominal level). 110dB Typical DA Converter (STEREO A). 108dB Typical AD+DA (to STEREO A). Hum & Noise (Input Gain=Max, PAD=Off, Master fader at nominal level and one input fader at nominal level). 86dBu residual output noise (STEREO A). Maximum Voltage Gain: 86dB INPUT 1-48 to Each Output. Dimensions (WxHxD): 1274mm x 286mm x 701mm. Power Requirements: AC100-240V, 50/60 Hz. Operation Free-Air Temperature Range: +10°C to +35°C. Storage Temperature Range: -20°C to +60°C. INPUT 1-48 (XLR-3-31 type, balanced). Actual Load Impedance: 3 kOhms.

For Use with Nominal: 50 - 600 Ohm Mics and 600 Ohm Lines. Sensitivity: -82dBu (61.6 uV). Before Clip: -42dBu (6.16mV). Before Clip: +30dBu (24.5V). ST IN 1-4 [L, R](XLR-3-31 type, balanced).

Before Clip: -40dBu (7.75mV). Before Clip: +4dBu (1.23V). OMNI OUT 1-16 (XLR-3-32 type, balanced). Actual Source Impedance: 75 Ohms. For Use with Nominal: 600 Ohm Lines.

Before Clip: +24dBu (12.28V). Actual Source Impedance: 15 Ohms. For Use with Nominal: 8 Ohm phones, 40 Ohm phones. 8 Ohm Phones, Nominal: 75mW. 40 Ohm Phones, Nominal: 65mW.

2TR OUT DIGITAL (XLR-3-32 type, balanced). The item "Yamaha M7CL-48 console withspare psu & roadcase" is in sale since Wednesday, August 17, 2016. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Live & Studio Mixers". The seller is "fm_systems_edm" and is located in Edmonton, Alberta.

This item can be shipped to United States.

  • Brand: Yamaha
  • Analog/Digital: Digital
  • MPN: M7CL


Yamaha M7CL-48 console withspare psu & roadcase    Yamaha M7CL-48 console withspare psu & roadcase